Car ECU Programmer

How to use CGDI FC200 ECU Programmer to clone Audi Gearbox DL382 data? Audi gearbox clone only supports to do on bench, NOT support OBD method, please disassemble gearbox module before operation. The clone procedure will need to read & write D Flash, EXT D Flash, P Flash. Read the steps below to learn how to do. Identify Start CG FC200 software, Select car brand “Audi”. If you don’t know its model, enter “DL382” in search box. It’ll display a model in ECU: VAG_TEMIC_DL382 TC1784, just select it. On bench >> Wiring diagram Follow the diagram to connect Audi gearbox. Click “identify”. CPU info has successfully read out, which means connection is OK. Read & Write Data Click “Read D Flash”, then save file. Click “Read EXT D Flash”, then save file. Click “Read P Flash”, then save file. P Flash reading will take for minutes, please wait and do not remove the module. After reading completed, write data separately in turn. Click “Write D Flash” to load s

Tachograph programmer CD400 Calibrates and programs all analogue and digital tachographs up to the Smart tachograph (1C/ Gen-2) New functions – High accuracy W measure with photo sensor – Multi W measures with calculation of the average – Support of the DTCOSIM Features Multi language English, Deutsch, Español, Français, Nederlands, Português, Italian, Polish,Turkish, Romanian, Serbian, Russian Advantages – No power connection nor battery charging required, the only tester powered by the tachograph itself. – Compact size, the smallest tachograph tester on the market. – User friendly, clear 4 lines menus, no training required. – Automatic tachograph model detection on power on. – Double accuracy of the W factor measure on track by detecting half pulses. – The only tester being able to reset the odometer and change the sender type on the VR2400.. Supported tachographs Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400. Digitals: DTC

  1.What is a tachograph ? What is a tachograph? Basically, a tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk. The new digital tachographs record those data on its embedded memory and also on the smartcard of the driver. 2.Description 2.1 Technical specifications Graphic FSTF LCD Display: (100 x 32 pix. / 4 lines x 20 char) White LED backlight Size: 150 x 100 x 45 mm Supply voltage: 9 to 30 VDC Supply current: 12mA Case: green-blue ABS (IP40). Operating temp: -20…+70°C Weight: 155g 2.2. Keyboard – Alternate function keys ‘F1′, ‘F2′ & ‘F3′ are active when a function in inverted video appears on the bottom line of the display. F1= MODIFY, F3=OK – Alernate function key ‘↑’ & ‘↓’ are used for example to navigate the menus. – Alernate function key ‘←’ & ‘→’ are used to select the digit in some parameters. – ‘Ent’ (=Enter) is used to select a function